Fountaine Pajot Astréa 42 Buyer’s Guide
Sailing CatamaranThe Fountaine Pajot Astréa 42 is a 12.58 m (41 ft) cruising catamaran first built in 2018, designed by Berret-Racoupeau and built by Fountaine Pajot in France. It won the 2019 European Yacht of the Year award in the Multihull category.
Lighter review 26 Oct 2026, full check due Jan 2027How we check our guides
Updated 10 June 2026 · By Hulls.io Editorial
The Fountaine Pajot Astréa 42: A Complete Guide
The Fountaine Pajot Astréa 42, first built in 2018, is a cruising catamaran designed by the Berret-Racoupeau studio and built by Fountaine Pajot in France. SAIL describes it as an all-new design rather than a modification of the earlier Helia 44, incorporating features from the yard’s Saona 47 (nominated for European Yacht of the Year 2018, the builder says), including slightly inverted hulls. Multihulls World reports that it replaced the Lipari 41, slotting between the Lucia and the Helia in the range. In the 40–42 ft catamaran segment it competes with the Lagoon 42, Bali 4.2, and Leopard 42. It is not the same boat as the FP41, which Fountaine Pajot introduced in 2025 as the first of a new generation of its sailing catamarans, with a 12.10 m hull and a 6.92 m beam on the builder’s figures.
The Astréa 42 won the 2019 European Yacht of the Year award in the Multihull category, presented at Boot Düsseldorf.
Berret-Racoupeau says its cooperation with Fountaine Pajot began in 1991 with the Marquise 56 and that all of the yard’s sailing catamarans bear its signature, so the Astréa 42 draws on a long line of the studio’s Fountaine Pajot hulls.
Fountaine Pajot Astréa 42 Specifications
| Specification | Detail |
|---|---|
| LOA | 12.58 m (41 ft 3 in) |
| Beam | 7.20 m (23 ft 7 in) |
| Draft | 1.25 m (4 ft 1 in) |
| Light displacement | ~12,700 kg (Multihulls World 12,670 kg; boat-specs 12,700 kg) |
| Air draft | 20.62 m (67 ft 8 in) |
| Mainsail area | 70 m² (753 sq ft) |
| Furling genoa | 41 m² (441 sq ft) |
| Total upwind sail area | 111 m² (1,195 sq ft) |
| Gennaker (optional) | 96 m² (1,033 sq ft) |
| Engines (standard) | 2× Volvo Penta, 30 HP |
| Fuel capacity | 470 litres (124 US gal) |
| Water capacity | 700 litres (185 US gal) |
| Cabin layouts | Maestro (3-cabin owner) / Quatuor (4-cabin) |
| Heads | 3 (Maestro) / 4 (Quatuor) |
| Naval architect | Berret-Racoupeau Yacht Design |
| Builder | Fountaine Pajot, Aigrefeuille-d’Aunis, France |
| Construction | GRP, vacuum infusion |
| CE category | A (Ocean) |
| Production years | From 2018 |
The 7.20 m beam is narrower than the Lagoon 42’s 7.68 m, which can widen the choice of marina berths. The 1.25 m draft is shallow enough to access the majority of coastal anchorages in the Caribbean, Mediterranean, and Bahamas, whilst being deep enough to provide adequate lateral resistance under sail.
The 700-litre water capacity (2 × 350 litres) is generous for a catamaran of this size — more than double the Lagoon 42’s 300 litres — and extends the boat’s self-sufficiency at anchor. The 470-litre fuel capacity, while adequate for coastal cruising, is more modest; owners planning extended passages under power will want to plan fuel stops carefully or consider supplementary tankage.
The hull and deck are vacuum-infused GRP sandwich. Published displacement figures vary: Multihulls World gives 12,670 kg and boat-specs 12,700 kg light, while SAIL’s test quoted 23,000 lb (about 10,430 kg) lightship, so weight comparisons with rivals should be made on figures from the same source and basis. The CE Category A (Ocean) rating permits ocean passages in winds that may exceed force 8 and significant wave heights of 4 metres and above, confirming the boat’s structural suitability for bluewater sailing.
How Does the Fountaine Pajot Astréa 42 Sail?
The Astréa 42 uses a Berret-Racoupeau hull form with the slightly inverted hulls first seen on the Saona 47 (SAIL). Multihulls World found that under gennaker the boat “shows great power, and the passage through the water is fluid and agile”.
Upwind: The upwind sail plan is a 70 m² square-top mainsail and a 41 m² solent, 111 m² in all. SAIL’s test was sailed in light air: at 45 degrees apparent the boat made 2.8 knots in 6.3 knots of breeze.
Light air: Cracked off to 60 degrees apparent on the same test, SAIL recorded 3.6 knots in 7.1 knots of apparent wind. As with any production cruising catamaran, a Code 0 or gennaker (96 m² on Multihulls World’s figures) is worth having for owners who want to avoid reaching for the engine in light conditions.
Under power: With twin 30 HP Volvo Penta diesels, SAIL recorded 6.5 knots at 2,400 rpm and 7.5 knots at 2,900 rpm. The fixed keels and twin rudders draw just over 4 ft.
Overall sailing character: Multihulls World called it “a sleek and powerful sailplan for a 42 footer which is designed for comfort”. For buyers who intend to sail their catamaran rather than simply motor between anchorages, it is worth a sea trial in a breeze.
Interior Layout & Living Aboard
The Astréa 42 is offered in two primary layouts that reflect different ownership models. The Maestro (3-cabin owner’s version) dedicates the entire starboard hull to the owner’s suite, with a walk-around island berth that SAIL found had ample light and a separate head compartment with a walk-in shower. The port hull contains two guest cabins, each with its own en-suite head.
The Quatuor (4-cabin charter version) provides four double cabins with en-suite bathrooms — two per hull. Depending on layout and options the boat sleeps 6 to 10.
The saloon is bright, and the galley has a large Airlux oven at counter height and an opening hatch above the stove for ventilation (SAIL). The galley opens to the cockpit through a large sliding door and window. The cockpit is shaded by a rigid bimini, with the helm pod raised on the bimini and an angled console, and gives direct access to the transoms; a hydraulic swim platform was an option.
Multihulls World described the interior styling as “urban-chic”, with Alpi furniture and Serge Ferrari upholstery. Natural light comes through hull windows, overhead hatches and the saloon glazing.
For liveaboard owners, the 700-litre water capacity provides useful autonomy, and a watermaker extends it. Storage is well-planned across both hull layouts, with good use of the hull volume for lockers, drawers, and bilge storage. Ventilation relies on opening hatches, ports, and optional fans; air conditioning is a near-essential addition for tropical cruising grounds. The forward trampolines provide an additional lounging area that is particularly popular in calm anchorages, and the aft sugar scoop transoms offer easy water access for swimming and dinghy launching.
Fountaine Pajot Astréa 42 Ownership: What to Expect
The Astréa 42’s 7.20 m (23 ft 7 in) beam is narrower than the Lagoon 42 (7.68 m), which matters when finding a berth. Principal ownership considerations include:
- Insurance: Premiums depend on cruising area, experience and equipment; some insurers take account of safety kit such as AIS, EPIRB and a life raft.
- Marina berth: The 7.20 m beam requires a catamaran-width berth in most marinas. The narrower beam relative to competitors can sometimes allow the boat to fit in berths designated for smaller catamarans, creating additional options in tight marinas.
- Engine servicing: Twin Volvo Penta diesels and their saildrives need servicing on Volvo Penta’s schedule.
- Haul-out and antifouling: A haul-out covers travel lift, pressure wash, antifouling, anode replacement, and hull inspection.
- Rigging and sails: Standing rigging inspection and replacement on the rigger’s and insurer’s recommended intervals. Running rigging and sail repairs depend on usage intensity and cruising conditions.
The Astréa 42 is used in charter fleets as well as privately. Charter management programmes are available to owners, though charter use increases wear on interior fittings, upholstery, and deck hardware.
How to Buy a Fountaine Pajot Astréa 42: What to Look For
Model years: Production began in 2018, so the oldest Astréa 42s are now about eight years old. Early boats appear on the brokerage market as first owners upgrade or as charter boats complete their management programmes.
Known Issues to Inspect
- Saildrive seals: As with any saildrive-equipped catamaran, the saildrive leg seals are a critical inspection point. Check for weeping or evidence of past replacement, and budget for seal replacement on the manufacturer’s schedule.
- Gelcoat condition: Inspect for crazing or stress marks around high-stress areas, particularly near chainplates, hull-to-deck joints, and the transom areas. Minor gelcoat crazing is cosmetic rather than structural but can indicate areas of higher-than-expected stress.
- Anchor roller and windlass: Inspect the roller, check the windlass motor, and assess whether the ground tackle has been upgraded.
- Sliding door mechanism: The large retractable sliding door between saloon and cockpit is a defining feature of the boat, but the tracks and seals require periodic maintenance. Inspect for smooth operation, seal condition, and any evidence of water ingress around the door frame.
- Trampoline condition: On boats with significant use, the forward trampolines can stretch and wear. Check for UV degradation, stitching condition, and attachment point integrity.
Maestro vs Quatuor
The Maestro (3-cabin) layout gives the owner the expansive starboard-hull master suite with its integrated dressing room. The Quatuor (4-cabin) is better suited to buyers who plan to charter the boat themselves or who regularly host multiple couples. For private ownership, the Maestro is the layout built around the owner.
Equipment Worth Looking For
When assessing a used Astréa 42, the following additions spare the buyer retrofit work: watermaker, solar panels, davits with dinghy and outboard, Code 0 or asymmetric spinnaker, upgraded electronics (chartplotter, radar, AIS), lithium battery conversion, generator, upgraded anchor and chain, and air conditioning. A well-equipped boat saves the buyer the disruption of commissioning work.
Surveying a Catamaran
A catamaran survey should pay particular attention to bridgedeck stress, hull-to-deck joint integrity, bulkhead condition, rudder bearing wear, and saildrive seal condition. Engine hours should be cross-referenced with service records. Ensure the surveyor has specific multihull experience — monohull surveyors frequently miss catamaran-specific structural concerns such as bridgedeck slamming damage and hull-to-crossbeam connections. A sea trial under both sail and power is essential; many issues only manifest under load and at speed.
Fountaine Pajot Astréa 42 vs Competitors
The 40–42 ft cruising catamaran segment is a crowded one. The Astréa 42 competes with boats that take meaningfully different approaches to the same fundamental challenge: balancing sailing performance, living space, and build quality. Understanding these trade-offs is essential to choosing the right boat for your cruising plans.
Astréa 42 vs Lagoon 42
This is a key comparison in the 40–42 ft catamaran segment. The Lagoon 42 is the most-sold cruising catamaran of all time by Lagoon’s account, with over 1,000 hulls built by October 2023. It is wider (7.68 m vs 7.20 m) and has the brand recognition and dealer network of Groupe Beneteau behind it. The Astréa 42 counters with a narrower beam and the generous 700-litre water capacity (vs 300 litres on the Lagoon). The Lagoon has more beam for interior volume; on the used market, its production numbers mean more choice. Lagoon now lists the 42 as a previous model.
Astréa 42 vs Lagoon 43
The Lagoon 43 succeeds the Lagoon 42 with a semi-flybridge, forward cockpit, and Lagoon’s quoted tankage of 570 litres fuel and 630 litres water. The Astréa 42 is the alternative for buyers who want a conventional aft-cockpit catamaran without a semi-flybridge.
Astréa 42 vs Bali 4.2
The Bali 4.2 from the Catana Group takes a fundamentally different approach to catamaran design. The solid composite foredeck replaces traditional trampolines, the signature tilting “garage door” merges the saloon and cockpit into a single open-air living space, and the overall design philosophy maximises indoor-outdoor integration. Bali gives the Bali 4.2 a 7.07 m beam, a touch narrower than the Astréa’s 7.20 m. The Astréa 42 is the more traditional sailing catamaran — trampolines and a conventional rig. The Bali prioritises lifestyle and deck space; the Astréa is the more conventional choice for buyers who spend significant time under sail. For those who value the open-space living concept and spend more time at anchor, the Bali offers a distinctive alternative.
Astréa 42 vs Leopard 42
The Leopard 42 is built by Robertson & Caine in South Africa. The Astréa 42 offers a French Berret-Racoupeau design and the Fountaine Pajot dealer and service network. On the used market, many Leopard 42s are ex-charter boats.
Astréa 42 vs Fountaine Pajot Lucia 40
Within Fountaine Pajot’s own range, the Lucia 40 is the smaller sister model in the lineup; it was launched in 2016 and replaced by the Isla 40 in 2020, not by the Astréa 42. Against the Lucia, the Astréa is longer (12.58 m vs 11.73 m LOA) and beamier (7.20 m vs 6.63 m), and carries features from the Saona 47. A used Lucia 40 is the smaller, simpler alternative from the same yard and design studio.
For a full interactive depreciation comparison between the Fountaine Pajot Astréa 42 and competing models, visit the Hulls.io Market Intelligence tool.
Fountaine Pajot Astréa 42 Value Retention
Newest vintage = 100%. Older vintages shown as % of that price.
Based on median asking prices by model year. The newest model year in our dataset is used as the 100% reference point. The curve is smoothed so retention never increases as age increases — hover over data points to see raw values. Shaded band shows the 25th–75th percentile price range. Figures reflect asking prices from tracked listings, not final sale prices.
